Veito Instant Water Heater Models

Blue S is the family's most powerful and most advanced model. It delivers up to 8 litres of hot water a minute to several taps at the same time : two bathrooms at once, the kitchen, the laundry. For a large family, a flat with several bathrooms, a restaurant, hotel or business it is a solution with the comfort of a boiler — it is our most popular model.

On the display you set the temperature precisely, from 20–60°C, and the Flow series from 20–55°C; ; set 40 and you get 40, no more "hot then cold". The display also shows the ECO energy indicator and, for the first 10 seconds, the flow rate (L/min) . It has a wire heating element — hard water barely affects it and it needs no periodic limescale servicing.

The Blue family's rotary-knob, plain sibling of the Blue family. Power, cable, fuse and water performance are the same as the Blue S; the only difference is a classic control knob instead of a digital display. Perfect for "I don't want to fiddle with a screen, let me just turn it and leave it".

The knob position marked with a saucepan symbol gives roughly 42 °C ; that is the ideal everyday setting. It has a wire heating element — no limescale servicing needed.

The Flow E9 is the central solution for single-phase (220V) homes: one appliance feeds both the bathroom and the kitchen from the same line. Its slim body takes up no wall space and you set the exact temperature on the digital display.

It is ideal for homes where the water pressure is not very high. In winter, when the mains water is colder, you may need to run the tap a little lower to reach the temperature you want — 9 kW heats about 4.5 litres of water. It has a wire heating element, so it needs no limescale servicing.

Speed-E The appliance sold as is identical to the Flow E9 (same power, same figures). The difference is how it is sold: the Flow E9 comes with installation, the Speed-E is an export product and its installation is chargeable.

The Flow E7 has the same slim body as the Flow E9 ; the difference is its power — 7 kW. Its real advantage is ease of installation: it can be fed from an existing socket circuit, with no need to run a new line from the consumer unit. It is the most practical solution for rented flats, holiday homes and anywhere the electrical installation cannot be touched.

You set the exact temperature on the digital display. At 7 kW it heats about 4 litres of water a minute; it is ideal for homes where the water pressure is not high. It has a wire heating element, so it needs no limescale servicing.

The replacement for the discontinued V1100 — shower-type model. It is fitted directly inside the shower and supplies hot water to that shower only — it does not feed the basin or the kitchen. Inside the box you will find the shower head and hose.

Palm-sized (1.7 kg) with three power steps: in summer you turn it down to step 1 and it barely uses electricity, in winter you turn it up to step 3. The most economical answer for "I just want hot water in my shower, keep it affordable".

⚠ Limescale warning: Glow, V1200 and V1100 the older generation of conventional heating elements ; these three models are affected by hard water. All other Veito models (Blue and Flow series) use wire elements and do not scale up.

Our shower unit — a shower head and hose come in the box, so you do not need to buy a head separately. It is fitted directly inside the shower and works in that shower only; it does not feed the basin or the kitchen.

8 kW with three power steps; it heats around 4 litres a minute. The flow knob underneath the body is found only on the V1200 and must be opened fully anticlockwise — if it is left half open the water runs weak. In use it is almost the same appliance as the Glow, the difference being the body size; it is also sold as "Lux".

⚠ Limescale warning: V1200 uses an older-generation conventional heating elementand is affected by hard water. Service calls for this model are usually chargeable.