Back to home page
Prices Stated Openly

Service Prices

Our installation, fitting, repair and product prices are listed below. For anything out of the ordinary we survey the site free of charge.

Quick Answer

How much does Veito installation and service cost in Antalya?

Our current installation, repair and product prices are listed in the tables below. The price depends on the type of work (new installation, repair, removal and refitting), the materials needed and the model of the appliance. Labour is free for faults covered by the warranty.⁠​‌‌​‌​‌​​​​​​‌​‌​​‌​‌‌​​​‌​​‌‌‌‌

In special cases we survey the site free of charge. For a firm price, just send us your appliance model and the problem on WhatsApp — we reply the same day.

Deniz Teknik · Authorised Veito Service · Muratpaşa/Antalya  ·  0242 311 31 30  ·  WhatsApp
Installation & Fitting
Prices include labour; any extra materials are charged separately
Under-Basin Installation
Standard installation under a bathroom or kitchen basin. Water and electrical connections included.
1.200 / installation
Installation Replacing a Boiler
Veito installed in place of the boiler. Connection to the 4-pipe system on the balcony.
1.000 / installation
Fitting Service
General fitting and commissioning where the pipework and electrics are already in place.
1.000 / fitting

Where extra materials are needed (long pipe runs, a consumer unit, valves and so on) we carry out a free survey . After the survey we give you a firm price.

Repairs & Service
An engineer comes to you to diagnose and repair the fault on site
Repair / Service Call-Out
On-site fault finding, diagnosis and labour. Our team comes to your address.
1.000 / call-out

Important: The call-out charge covers diagnosis and labour. Any spare parts that need replacing are charged separately. We tell you during the visit whether a part is needed and what it costs.

Relocation Service
Removing your existing unit, moving it and installing it in its new position
Veito V1200 Relocation
Taking the V1200 off its old position and installing it in the new one. Removal, transport and installation included.
1.500 / relocation
Flow-E7 / Flow-E9 / Blue-S Relocation
Taking Flow-series and Blue-S units off their old position and installing them in the new one.
2.000 / relocation

If extra pipework or wiring is needed at the new position, a supplement may apply. Give us a ring before the move and we'll talk it through.

Product Prices
Prices vary by model and by current promotions
Veito V1200
220V · 8 kW · mechanical · shower-only
Get a Price
Flow-E7
220V · 7 kW · whole-home · digital temperature control
Get a Price
Flow-E9
220V · 9 kW · whole-home · digital temperature control
Get a Price
Blue-S
380V · 21 kW · whole-home · digital temperature control
Get a Price
Shower Unit
220V · 8 kW · mechanical · shower type (Glow / V1100 / V1200)
Get a Price

Unit + installation package price — ask us on WhatsApp or by phone. Same-day or next-day installation is often possible.

Installation Materials — Whole-Home · Electrical
Not included in the service/labour charge; invoiced separately
🔌
Supply cable (per metre)
Cross-section chosen to suit the unit (3G2.5 / 3G6 / 4G4). Length measured on site.
/ metre
🛡️
Breaker / RCD
RCD / circuit breaker at the right rating for the unit (32A / 40A / 3×32A).
each
🎚️
Consumer unit / wiring labour
Connecting at the consumer unit, running the cable and making the circuit safe.

Exact material costs are established on site; the figures listed here are for guidance.

Installation Materials — Whole-Home · Plumbing
Under-basin work, combi connections and valves
🚰
Under-basin water connection
Making the unit's inlet and outlet water connections under the basin.
🔥
Combi connection point
Preparing the water connection integrated into the existing combi pipework.
🚿
Isolation valve / tap
Inlet valve, isolation tap and the necessary fittings.
each

Exact material costs are established on site; the figures listed here are for guidance.

Installation Materials — Shower Units
Installation materials for the V1200 and Glow shower units
🔌
Supply cable + breaker
3G2.5 cable and a 32 A breaker (standard for shower units).
🚿
Water connection + shower kit
Inlet and outlet connections plus fitting the shower head and hose.

Exact material costs are established on site; the figures listed here are for guidance.

Spare Parts — Whole-Home Units
Parts that may be needed for Blue-S, Flow-E9 and Flow-E7 faults
🔥
Heating element
The heating element. May need replacing when the unit doesn't heat, or heats weakly.
each
🔲
Circuit board
Control or power board. For display faults and units that won't start.
each
🌡️
Temperature sensor
Measures the water temperature. For wrong temperatures and error codes.
each
💧
Flow switch
Detects water flow. For units that stay off even though water is running.
each
Spare Parts — Shower Units
Parts that may be needed for V1200 and Glow faults
🔥
Heating element
The heating element. May need replacing when the unit doesn't heat.
each
🎛️
Power selector switch
The heat/power level switch. For when the level can no longer be selected.
each
Seal / O-ring set
Sealing gaskets. For leaks and dripping.
/ set
🚿
Shower hose / head
The shower hose and head. For wear and blockages.
each

Part prices vary by model; we confirm the exact figure once the fault has been diagnosed.

Free survey & quotation

We'll survey your home or business free of charge and put together a quotation for you.
We cover Muratpaşa, Konyaaltı, Kepez, Döşemealtı and the surrounding districts.